By Restoration Advertising · 11/16/2026

Christmas Tree Fires: What NFPA's Data Actually Says

NFPA's numbers on home Christmas tree fires, what starts them, why a dry tree burns so fast, and the watering, lights and take-down steps that matter.

A fir tree in a water-filled stand with a smoke alarm above

Christmas tree fires are rare but unusually serious. NFPA's most recent figures put them at about 143 home fires a year in 2020–2024, with an estimated 7 deaths, 13 injuries and $15 million in property damage a year (NFPA: Winter holidays). Nearly half are caused by electrical problems, nearly one in four by a heat source too close to the tree, and in NIST's one test of a dry tree, a small ignition became a room-sized fire in about half a minute.

How many Christmas tree fires happen each year?

NFPA publishes the figures two ways: a full research report and shorter safety pages that are refreshed more often. They cover different years, so the numbers differ.

NFPA source Years covered Home tree fires per year Deaths per year Injuries per year Property damage per year
"Christmas Tree Fires" research report (Richard Campbell, December 2022) 2016–2020 160 2 11 $12 million
NFPA blog, November 26, 2024 2018–2022 155 4 7 $15 million
NFPA Winter holidays page 2020–2024 143 7 13 $15 million

Sources: NFPA: Christmas Tree Fires report (PDF), December 2022; NFPA: How to Help Prevent Home Christmas Tree Fires, November 26, 2024; NFPA: Winter holidays.

The death count moving from 2 to 7 does not mean trees got more dangerous. The report itself warns that casualty estimates "can be heavily influenced by the inclusion or exclusion of one unusually serious fire." The longer trend is down: the report counts a high of 280 home tree fires in 2007 and a low of 130 in both 2016 and 2017.

What the totals hide is the point NFPA makes repeatedly: a tree is in the house for a few weeks of the year, and when one does catch, the fire is more likely to be serious than an average home fire.

What actually starts a Christmas tree fire?

The full breakdown comes from the December 2022 report, which covers 2016–2020. Its Table A lists the equipment involved in ignition, and a separate chart lists the human factors.

Equipment involved in ignition (2016–2020 annual averages)

Equipment Share of fires Share of injuries Share of property damage
Electrical distribution and lighting equipment (all) 44% 47% 50%
Lamps, bulbs or lighting 19% 12% 37%
Wiring and related equipment 19% 35% 2%
Cords or plugs 6% 0% 10%
Heating equipment (all) 13% 0% 20%
Fixed or portable space heaters 6% 0% 7%

Factors contributing to ignition (2016–2020 annual averages)

Factor Share of fires
Electrical failure or malfunction 34%
Heat source too close to the tree 20%
Misuse of a material or product 9%
Abandoned or discarded material 6%
Playing with a heat source 6%

Source: NFPA: Christmas Tree Fires report (PDF), December 2022.

Newer NFPA material points the same way. The 2024 blog post (2018–2022 data) puts electrical distribution or lighting at 41% and says candles started 11% of home tree fires. The current Winter holidays page rounds the 2020–2024 picture to "nearly half" electrical and "nearly one in four" heat source too close.

Where they start matters too. In the 2016–2020 report, about two in five tree fires began in the living room, family room or den, and those fires caused 73% of the injuries. Half of all tree fires happened between 3 p.m. and midnight.

How fast does a dry Christmas tree burn?

Very fast, and the difference between dry and watered is not a matter of degree. In tests run in 2017 and reported in December 2020, NIST burned two 7-foot Douglas firs cut about four weeks earlier: one kept in water from within three hours of harvest, one never watered (NIST: Fire Hazards of Dry Versus Watered Christmas Trees, Technical Note 2131 (PDF), December 2020).

Tree What happened Peak heat release
Watered Three ignition attempts, including a larger double matchbook placed at the driest needles; no sustained ignition, fire went out on its own 6.7 kW at 71 seconds
Dry Ignited on the first attempt and grew rapidly 7,362 kW at 31 seconds

That is roughly a thousand-fold difference in peak fire size, reached in about half a minute. NIST cautions that it was one test of each tree in a mock room corner, so the numbers should not be extrapolated. An earlier NIST demonstration showed a similar result: a watered Scotch pine's branches "ignited briefly, but self-extinguished" when a propane torch was taken away (NIST: Video: Fire Safety for the Holidays, updated September 9, 2025).

A fire that size in a living room is a 911 call, not something to fight with a kitchen extinguisher. Get everyone out, close the door behind you if you can, and call from outside.

How do you keep a real tree from drying out?

NFPA's tip sheet and CPSC's guidance agree on the steps. Each one has a reason.

Step Why it matters
Choose a tree with fresh green needles that do not fall off when touched A tree that is already shedding is already drying (NFPA: Christmas Tree Safety tip sheet (PDF), 2025)
Cut 2 inches off the base of the trunk before it goes in the stand NFPA's tip sheet gives the step; NIST's watered tree also got a fresh cut about 2 inches from the base before it went in water (TN 2131), so the test and the advice match. Why a fresh cut helps is our explanation, not NFPA's
Add water to the stand every day CPSC notes that "heated rooms rapidly dry out live trees" (CPSC: Holiday Safety Alert, December 13, 2011)
Keep the tree at least 3 feet from any heat source: fireplaces, radiators, candles, heat vents and lights A heat source too close caused 20% of tree fires in 2016–2020; USFA uses the same 3-foot rule for all heat sources (USFA: Heating Fire Safety, reviewed May 4, 2023)
Make sure the tree does not block an exit It is a placement rule on NFPA's tip sheet; the point is that a fire that grows in seconds should not sit between people and the door. We found no data on how often that matters
Never decorate a tree with lit candles Candles started 11% of tree fires in 2018–2022

CPSC adds one more: do not burn wrapping paper in the fireplace, because it can flash-ignite (CPSC: CPSC and NIST Team Up to Demonstrate Holiday Decorating Hazards, December 6, 2018).

Which lights and cords are safe on a tree?

Since lighting and wiring together account for more tree fires than any other cause, this is where checking pays off.

  • Use lights listed by a qualified testing laboratory, and match them to the location: some sets are indoor-only, some outdoor-only (NFPA tip sheet). CPSC explains UL's marks: a red holographic UL label means indoor and outdoor use, a green one means indoor only (CPSC, 2011).
  • Throw out damaged sets. Broken sockets, frayed or bare wires and loose bulb connections are reasons to replace the string, not tape it (CPSC, 2011; NFPA tip sheet).
  • Respect the connection limit. Follow the maker's limit on how many strands can be linked. CPSC's rule of thumb is never more than three sets of incandescent lights, and never overload outlets (CPSC: Happy Holidays Start with Safety, November 19, 2024).
  • Hang lights with clips, not nails, so cords are not damaged (NFPA: Winter Holiday Safety tip sheet (PDF), 2025).
  • No electric lights on a metallic tree (CPSC, 2011).
  • Outdoor sets go into a GFCI-protected outlet or a portable GFCI (CPSC, 2011).
  • Turn the tree lights off before leaving home or going to bed (NFPA tip sheet).

Is an artificial tree labeled "fire resistant" safe?

Safer, not safe. CPSC advises looking for the "Fire Resistant" label, and is plain about what it means: the label does not mean the tree won't catch fire, only that it is more resistant to catching fire (CPSC, 2011 and 2018). An artificial tree also removes the drying problem entirely, which is the main advantage. The light-and-cord rules above apply to it in full, and the 3-foot distance from heat sources still holds.

When should you take the tree down?

Soon after Christmas. NFPA's Winter holidays page says 35% of Christmas tree fires were in January (it does not give the years). The 2022 report notes that some January fires may have occurred after the tree was taken down.

NFPA's tip sheet says to get rid of the tree after Christmas or as soon as it is dry, and that a dried-out tree should not be left in the home or garage, or placed outside against the house. Check with your town for a tree recycling program. Bring outdoor lights inside after the holidays as well.

What if a tree fire does happen?

Get out and call 911 first. Once the fire department has cleared the house, smoke from a tree fire spreads well beyond the room it started in, and much of it is invisible.

Our guide to smoke damage you can't see, and why the smell comes back explains what that residue does. Before anything is cleaned or thrown away, document the loss for your insurer; what your policy covers depends on the policy and your state, and your state insurance department can explain your rights.

Researched and drafted with AI, then reviewed and edited by the site's editors.